Set console parity, Command mode, Description – Avaya P580 User Manual
Page 86: Syntax, Sample output, Systems, Set console parity -6
Chapter 5
5-6
Command Reference Guide for the Avaya P580 and P882 Multiservice Switches, v6.1
set console parity
Command Mode
Global Configuration.
Description
* Note:
Sets the parity for the console serial port. The default setting is
none.
* Note:
The concept of parity is not applicable to the console serial port
when it is configured in PPP mode. When the console serial
port is configured in PPP mode, the parity value cannot be
accepted or stored. However, to save a parity value, the console
serial port mode can be changed to TTY mode, the parity value
set, and the console serial port mode returned to PPP mode. The
parity value is saved until the console serial port is reconfigured
as TTY mode.
Syntax
set console parity {none | even | odd}
Sample Output
The following example sets the console parity to even.
(configure)#
set console parity even
Systems
P550R, P580, P880, and P882.
Table 5-5. Parameters, Keywords, Arguments
Name
Definition
{none | even | odd}
Required parameter. The value indicates the type of parity
to be applied to the console serial port.