Appletalk vlan, Command mode, Description – Avaya P580 User Manual
Page 53: Syntax, Sample output, Systems, Appletalk vlan -13
Document No. 10-300090, Issue 1
3-13
Appletalk
appletalk vlan
Command Mode
Interface Configuration.
Description
Assigns the Appletalk interface to a VLAN. The no form of this command
resets the VLAN to the discard VLAN, which is the default value.
Syntax
Sample Output
The following example sets Appletalk interface foo2 to VLAN auto50.
(config-if:auto50)#
appletalk vlan name foo2
Systems
P550R, P580, P880, and P882.
To Enable:
appletalk vlan {
To Disable:
[no] appletalk vlan
Table 3-9. Parameters, Keywords, Arguments
Name
Definition
The ID of the VLAN Appletalk uses for the interface.
The name of the VLAN Appletalk uses for the interface.
This manual is related to the following products: