Ip netbios-rebroadcast, Command mode, Description – Avaya P580 User Manual
Page 217: Syntax, Sample output, Systems, Ip netbios-rebroadcast -33
Document No. 10-300090, Issue 1
11-33
IP
ip netbios-rebroadcast
Command Mode
Interface Configuration.
Description
Enables NETBIOS rebroadcasts on an interface. The no form of this
command disables NETBIOS rebroadcasts on an interface (default).
Syntax
Sample Output
The following example enables NETBIOS rebroadcasts and accepts only
INBOUND broadcasts on an interface labeled “boston”.
(config-if:boston)#
ip netbios-rebroadcast inbound
Systems
P550R, P580, P880, and P882.
To Enable:
ip netbios-rebroadcast [{both | inbound | outbound |
disable}]
To Disable:
no ip netbios-rebroadcast
Table 11-18. Parameters, Keywords, Arguments
Name
Definition
{both | inbound |
outbound | disable}
Indicates how broadcasts are accepted.
• both - inbound and outbound broadcasts are
accepted.
• inbound - only inbound broadcasts are accepted.
• outbound - only outbound broadcasts are
accepted.
• disable - no broadcasts are accepted.