Entering and exiting the command modes, Entering and exiting the command modes -2 – Avaya P580 User Manual

Page 20

Chapter 1

1-2

Command Reference Guide for the Avaya P580 and P882 Multiservice Switches, v6.1

Entering and Exiting the Command Modes

See

Table 1-2

for an explanation of how to access and exit the command

modes.

Table 1-2. Entering and Exiting the Command Modes

Router Configuration

Commands to configure the
routing protocols.

From Global mode, enter
router
(dvmrp, igmp, ospf, rip,
or vrrp).

For DVMRP, OSPF,
and RIP: (configure
router:)#

For IGMP and VRRP:
(configure)#

Interface Configuration

Commands to configure the
interfaces.

From Global mode, enter
interface name>.

(config-if: name>)#

Mode

Description

To Access

Prompt

2 of 2

Mode

To Access

Prompt Displayed

To Exit

User

Enter exit.

Privileged

From the User mode,
enter enable.

Disable or exit returns to the
User mode.

Global
Configuration

From the Privileged
mode, enter configure.

(configure)#

Exit returns to the Privileged
mode.

Router
Configuration

From Global mode, enter
router
(dvmrp, igmp, ospf, rip,
or vrrp).

For DVMRP, OSPF, and
RIP:

(configure

router:)#

For IGMP and VRRP:

(configure)#

Exit returns to the Global
Configuration mode.

End returns to the Privileged
mode.

Interface
Configuration

From Global mode, enter
interface name>

(configure-

if:

name>)#

Exit returns to the Global
Configuration mode.
End returns to Privileged
mode.

This manual is related to the following products:

P882