Avaya P580 - Manual (Page 514)

Chapter 23
23-26 Command Reference Guide for the Avaya P580 and P882 Multiservice Switches, v6.1
set port queue service cbwfq
Command Mode Global Configuration.
Description Sets a port, port range, or module to use class-based weighted fair queuing
(CBWFQ) queue servicing.
Syntax set port queue service {{ | }[..., {num> | }] | all-ports} cbwfq queue bit-rate
normal-burst [exceed {drop | max-burst burst> [weight ]}]
Table 23-14. Parameters, Keywords, Arguments
Name Definition
The slot number of a module. If you specify , all ports
on the module are set to use CBQ.
range> The slot number of a module, and, either a port number, or a range
of port numbers having the format Px-Py. For example:
• To specify port 1 on the module in slot 3, enter 3/1.
• To specify ports 1 through 5 on the module in slot 3, enter 3/
1-5.
If you specify , the port or range of ports that
you specify is set use CBQ.
all-ports All ports in the chassis. If you specify all-ports, all ports on all
modules in the chassis are set to use CBQ.
The queue number, which can range from 0 to 7.
The maximum bits per second that you want to assign to the
queue.
If the switch is operating in Fabric mode 1, the rate can range from
220 Kbps to 1.5 Gbps.
If the switch is operating in Fabric mode 2, the rate can range from
270 Kbps to 1.5 Gbps
Entering a rate of 0 disables the queue.
1 of 2