Avaya P580 - Manual (Page 452)

Chapter 21
21-20 Command Reference Guide for the Avaya P580 and P882 Multiservice Switches, v6.1
set port internal-error-shutdown
Command Mode Global Configuration.
Description Sets switch ports to shutdown if their rate of internal errors exceeds the
threshold setting. To set the threshold, use the set-internal-error-threshold
command. For information on this and other IEDR commands, see
Chapter 18 , “ NEDR and IEDR .”
Syntax
Sample Output The following example enables IEDR on all ports on the module in slot 3.
(configure)# set port internal-error-shutdown 3 enable
Systems P550R, P580, P880, and P882.
To Enable: set port internal-error-shutdown { | swport-spec> | all-ports} enable
To Disable: set port internal-error-shutdown {{ | swport-spec>}| all-ports} disable
Table 21-18. Parameters, Keywords, Argument
Name Definition
{ | swport-spec>} The slot number of the module, and, either port
number, or range of port numbers. Enter the port
ranges in the format Px-Py. For example:
• To specify port 1 on the module in slot 3, enter
3/1.
• To specify ports 1 through 5 on the module in
slot 3, enter 3/1-5.
all-ports Enables or disables IEDR on all ports on all modules in
the switch.