Ip ospf transmit-delay, Command mode, Description – Avaya P580 User Manual
Page 402: Syntax, Sample output, Systems, Ip ospf transmit-delay -26
Chapter 19
19-26
Command Reference Guide for the Avaya P580 and P882 Multiservice Switches, v6.1
ip ospf transmit-delay
Command Mode
Interface Configuration.
Description
Sets the estimated time it takes to transmit a link state update packet on the
interface. The range is 1 to 3600 seconds. The default is 1 second. To
restore the default value, use the no form of this command.
Syntax
Sample Output
The following command sets the transmit delay time on interface 123 to
1000 seconds.
(config-if:123)#
ip ospf transmit-delay 1000
Systems
P550R, P580, P880, and P882.
To Configure:
ip ospf transmit-delay
To Restore Default:
[no] ip ospf transmit-delay
Table 19-18. Parameters, Keywords, Arguments
Name
Definition
Time in seconds that it takes to transmit a link state update.
The range is 1 to 3600 seconds. The default is 1 second.