Avaya P580 - Manual (Page 518)

Chapter 23
23-30 Command Reference Guide for the Avaya P580 and P882 Multiservice Switches, v6.1
set port use-diffserv
Command Mode Global Configuration.
Description Sets a port to classify bridged IP traffic by its DiffServ code point (DSCP).
Syntax
To Enable: set port use-diffserv {{ | range>}[...,{ | }] |
all-ports} on
To Disable: set port use-diffserv {{ | range>}[...,{ | }] |
all-ports} off
Table 23-17. Parameters, Keywords, Arguments
Name Definition
The slot number of a module. If you specify num>, the switch ignores tag priorities on all ports of
the module.
The slot number of a module, and, either a port number,
or a range of port numbers having the format Px-Py.
For example:
• To specify port 1 on the module in slot 3, enter 3/
1.
• To specify ports 1 through 5 on the module in
slot 3, enter 3/1-5.
If you specify , the switch ignores
tag priorities on the port or range of ports on the module
in the slot that you specify.
all-ports All ports in the chassis. If you specify all-ports, all
ports on all modules in the chassis are set with the same
priority.
{on | off} Indicates whether you want the port to ignore tag
priority. Enter on for the port to ignore the tag priority.