Set syslog severity, Command mode, Description – Avaya P580 User Manual
Page 356: Syntax, Systems, Set syslog severity -20
Chapter 16
16-20
Command Reference Guide for the Avaya P580 and P882 Multiservice Switches, v6.1
set syslog severity
Command Mode
Global Configuration.
Description
Sets the severity of error messages that you want logged.
describes the different syslog severity levels. The switch logs error
messages of the severity that you set and of all higher severities. For
example, if you set the severity to Warning, error messages of severities
Warning, Error, Alert, and Emergency are logged.
The default setting is error.
Syntax
set syslog severity {emergency | alert | error | warning | normal |
informational}
* Note:
See
for an explanation of each keyword.
Systems
P580 and P882.
Table 16-9. Syslog Severity Levels
Severity Level
Description
Emergency
System Unusable
Alert
Immediate action needed
Error
Error Condition
Warning
Warning Condition
Normal
Normal but significant condition
Informational
Informational message only