Show ip irdp, Command mode, Description – Avaya P580 User Manual
Page 241: Syntax, Sample output, Systems, Show ip irdp -57
Document No. 10-300090, Issue 1
11-57
IP
show ip irdp
Command Mode
User.
Description
Displays ICMP Router Discovery Protocol (IRDP) configuration.
Syntax
show ip irdp [
Sample Output
The following example displays the IRDP configuration on the switch.
>
show ip irdp
Router# show ip irdp
Console has ICMP Router Discovery Protocol enabled.
Network address is 192.168.60.53, subnet mask is
255.255.255.0
Advertisements sent using Multicast.
Advertisements occur between every 450 and 600
seconds
Advertisements valid for 1800 seconds.
Preference set to 0.
ip_if1 has ICMP Router Discovery Protocol disabled.
Network address is 10.1.1.10, subnet mask is
255.255.255.0
Advertisements sent using Multicast.
Advertisements occur between every 450 and 600
seconds
Advertisements valid for 1800 seconds.
Preference set to 0
Systems
P550R, P580, P880, and P882.
Table 11-32. Parameters, Keywords, Arguments
Name
Definition
Interface-name is an optional argument. If specified, it
requests ICMP IRDP information for the specified
interface.