Avaya P580 - Manual (Page 258)

Chapter 12
12-8 Command Reference Guide for the Avaya P580 and P882 Multiservice Switches, v6.1
ip rip send version
Command Mode Interface Configuration.
Description Specifies a RIP version to send on an interface basis. Use the no form of this
command to restore the default setting of RIP Version 1.
Syntax
Sample Output The following specifies that the interface labeled “boston” send RIP version
2 packets.
(config-if:boston)# ip rip send version 2
Systems P550R, P580, P880, and P882.
To Configure: ip rip send version [1] [2]
To Restore Default: no ip rip send version
Table 12-6. Parameters, Keywords, Arguments
Name Definition
[1] [2] The version of the RIP packets sent out the interface.
• 1 - send RIP Version 1 packets.
• 2 - send RIP Version 2 packets