Boot system flash, Command mode, Description – Avaya P580 User Manual
Page 620: Syntax, Sample output, Systems, Boot system flash -4
Chapter 30
30-4
Command Reference Guide for the Avaya P580 and P882 Multiservice Switches, v6.1
boot system flash
Command Mode
Global Configuration.
Description
Specifies which system image the switch loads at startup. Configures the
image to boot from the FEPROM. The no form of this command restores
the default system flash setting (app1).
Syntax
boot system flash {app1 | app2 | cardapp1 | cardapp2}
Sample Output
The following example sets the system image that the switch loads at
startup to cardapp2 on the pcmcia.
(configure)#
boot system flash cardapp2
Boot flag set to ’cardapp2’.
Systems
P580 and P882.
Table 30-1. Parameters, Keywords, Arguments
Name
Definition
app1 | app2
Choose app1 or app2.
cardapp1 | cardapp2
Choose cardapp1 or cardapp2.
This manual is related to the following products: