Avaya P580 - Manual (Page 507)

Document No. 10-300090, Issue 1 23-19
80-Series QoS
set port ignore-tag-priority
Command Mode Global Configuration.
Description Sets a port to ignore any layer 2 tag priority (including 802.1p tags). The
default setting is off.
Syntax
To Enable: set port ignore-tag-priority {{ | range>}[...,{ | }] |
all-ports} on
To Disable: set port ignore-tag-priority {{ | range>}[...,{ | }] |
all-ports} off
Table 23-10. Parameters, Keywords, Arguments
Name Definition
The slot number of a module. If you specify
, the switch ignores tag priorities
on all ports of the module.
The slot number of a module, and, either a
port number, or a range of port numbers
having the format Px-Py. For example:
• To specify port 1 on the module in slot
3, enter 3/1.
• To specify ports 1 through 5 on the
module in slot 3, enter 3/1-5.
If you specify , the
switch ignores tag priorities on the port or
range of ports on the module in the slot that
you specify.
all-ports All ports in the chassis. If you specify all-
ports, all ports on all modules in the chassis
are set with the same priority.
{on | off} Indicates whether you want the port to ignore
tag priority. Enter on for the port to ignore the
tag priority.