Ip ospf authentication-key, Command mode, Description – Avaya P580 User Manual
Page 389: Syntax, Sample output, Systems, Ip ospf authentication-key -13
Document No. 10-300090, Issue 1
19-13
OSPF
ip ospf authentication-key
Command Mode
Interface Configuration.
Description
Assign a password to be used by neighboring routers that are using OSPF’s
simple password authentication. To remove a previously assigned OSPF
password, use the no form of this command.
Syntax
Sample Output
The following command assigns the password “abc” as the authentication
key.
(config-if:intf3)#
ip ospf authentication-key “abc”
The following command removes the password “abc” as the authentication
key.
(config-if:intf3)#
no ip ospf authentication-key
Systems
P550R, P580, P880, and P882.
To Enable:
ip ospf authentication-key
To Disable:
[no] ip ospf authentication-key
Table 19-9. Parameters, Keywords, Arguments
Name
Definition
Any continuous string of characters that can be entered from the
keyboard up to 8 bytes in length.