Avaya P580 - Manual (Page 516)

Chapter 23
23-28 Command Reference Guide for the Avaya P580 and P882 Multiservice Switches, v6.1
set port queue service strict-priority
Command Mode Global Configuration.
Description Sets a port, port range, or module to use strict priority queue servicing.
Syntax set port queue service {{ | }[...,{num> | }] | all-ports} strict-priority
Sample Output The following example set ports 1 through 12 on module 5 to use strict
priority queueing.
(configure)# set port queue service 5/1-12 strict-priority
Systems
■ P550R and P880, 80-series modules only.
■
P580 and P882.
Table 23-15. Parameters, Keywords, Arguments
Name Definition
The slot number of a module. If you specify
, all ports on the module are set to
use strict priority queueing.
The slot number of a module, and, either a port
number, or a range of port numbers having the
format Px-Py. For example:
• To specify port 1 on the module in slot 3,
enter 3/1.
• To specify ports 1 through 5 on the module
in slot 3, enter 3/1-5.
If you specify , the port or
range of ports on the module that you specify is
set to use strict priority queueing.
all-ports All ports in the chassis. If you specify all-ports,
all ports on all modules in the chassis are set to
use strict priority queueing.