Avaya P580 - Manual (Page 511)

Document No. 10-300090, Issue 1 23-23
80-Series QoS
set port police
Command Mode Global Configuration.
Description Enables or disables policing for ingress traffic on a port.
Syntax
To Configure: set port police {{ | }
[..., { | }] | all-ports}
queue {bit-rate normal-burst
}
To Disable: set port police {{ | }
[..., { | }] | all-ports}
queue disable
Table 23-12. Parameters, Keywords, Arguments
Name Definition
The slot number of a module. If you specify num>, policing is enabled for all ports on the module
in the slot that you specify.
The slot number of a module, and, either a port
number, or a range of port numbers having the format
Px-Py. For example:
• To specify port 1 on the module in slot 3, enter
3/1.
• To specify ports 1 through 5 on the module in
slot 3, enter 3/1-5.
If you specify , policing is
enabled for the port or range of ports on the module in
the slot that you specify.
all-ports All ports in the chassis. If you specify all-ports,
policing is enabled on all modules in the chassis.
The queue number, which can range from 0 to 7.
1 of 2