Ipx advertise-default-route-only, Command mode, Description – Avaya P580 User Manual
Page 271: Syntax, Sample output, Systems, Ipx advertise-default-route-only -5
Document No. 10-300090, Issue 1
13-5
IPX
ipx advertise-default-route-only
Command Mode
Interface Configuration.
Description
Advertises only the default RIP route. The no form of this command
advertises all known routes out the interface.
Syntax
Sample Output
The following example advertises only the default RIP route configured on
an interface labeled “boston”.
(config-if:boston)#
ipx advertise-default-route-only
Systems
P550R, P580, P880, and P882.
To Enable:
ipx advertise-default-route-only
To Disable:
[no] ipx advertise-default-route-only
This manual is related to the following products: