Avaya P580 - Manual (Page 199)

Document No. 10-300090, Issue 1 11-15
IP
ip bootp-dhcp server
Command Mode Global Configuration.
Description Adds a BOOTP/DHCP server entry. The no command removes the
BOOTP/DHCP server entry.
When you add a BOOTP/DHCP server entry, the switch serves as a
BOOTP/DHCP relay agent between the BOOTP/DHCP server and the
requesting client.
* Note: Before you enter this command, make sure that the switch is set
to be a BOOTP/DHCP relay agent. Use the
ip bootp-dhcp relay
command to enable BOOTP/DHCP relay agent on the switch.
Syntax
Systems P550R, P580, P880, and P882.
To Add: ip bootp-dhcp server
To Remove: [no] ip bootp-dhcp server
Table 11-8. Parameters, Keywords, Arguments
Name Definition
address> IP address of the BOOTP/DHCP server for which you want to
add an entry.