Area nssa, Command mode, Description – Avaya P580 User Manual
Page 382: Syntax, Sample output, Systems, Area nssa -6
Chapter 19
19-6
Command Reference Guide for the Avaya P580 and P882 Multiservice Switches, v6.1
area nssa
Command Mode
OSPF Router Configuration.
Description
Configure an area as a Not So Stubby Area (NSSA). To remove the NSSA
distinction from the area, use the no form of this command.
Syntax
Sample Output
The following command sets nssa on the indicated area.
(configure router:ospf)#
area 2.0.0.0 nssa
The following command removes nssa from the indicated area.
(configure router:ospf)#
no area 2.0.0.0 nssa
Systems
P550R, P580, P880, and P882.
To Enable:
area
To Disable:
[no] area
Table 19-4. Parameters, Keywords, Arguments
Name
Definition
A decimal value or IP address that identifies an OSPF area. Use no
area