Ipx send-triggered-updates, Command mode, Description – Avaya P580 User Manual
Page 297: Syntax, Systems, Ipx send-triggered-updates -31
Document No. 10-300090, Issue 1
13-31
IPX
ipx send-triggered-updates
Command Mode
Interface Configuration.
Description
Immediately sends RIP or SAP updates to the network in response to
changes in the network topology. The no command disables triggered
updates. The default setting is enabled.
Syntax
Systems
P550R, P580, P880, and P882.
To Enable:
ipx send-triggered-updates {rip | sap}
To Disable:
[no] ipx send-triggered-updates {rip | sap}
Table 13-14. Parameters, Keywords, Arguments
Name
Definition
{rip | sap}
Specify RIP or SAP.
This manual is related to the following products: