Set port edge admin state, Command mode, Description – Avaya P580 User Manual
Page 447: Syntax, Systems, Set port edge admin state -15
Document No. 10-300090, Issue 1
21-15
Port
set port edge admin state
Command Mode
Global Configuration.
Description
Specifies whether a port is an edge port or a nonedge port. An edge port is
not connected to any other bridge. Only edge ports and point-to-point links
can rapidly transition to forwarding state.
If you set edge admin state to edge-port, the OperEdgePort field of the
show port command is also set to edge-port. However, if the port receives a
BPDU, the Oper Edge Port setting changes to non-edge-port. (To receive a
BPDU, the port must be connected to a bridge and thus is not an edge port.)
Syntax
set port edge admin state
{edge-port | non-edge-port}
Systems
P580 and P882.
Table 21-13. Parameters, Keywords, Arguments
Name
Definition
The module and port or port range.
edge-port
Defines the port as an edge port.
non-edge port
Defines the bridge as a nonedge port.