Avaya P580 - Manual (Page 592)

Chapter 28
28-14 Command Reference Guide for the Avaya P580 and P882 Multiservice Switches, v6.1
set spantree fwddelay
Command Mode Global Configuration.
Description Sets the Spanning Tree forward delay time for a bridge. The forward delay
time is the time a port takes to change to the forwarding state. The default
time is 15 seconds.
Syntax set spantree fwddelay {802.1D | vlan { | name
}}
Table 28-9. Parameters, Keywords, Arguments
Name Definition
The forward delay value for the bridge, in seconds.
The range is 4-30 seconds. The default setting is 15
seconds.
802.1D Use this keyword if the switch is running IEEE
802.1D Spanning Tree. For a detailed description of
IEEE 802.1D Spanning Tree, see Chapter 7,
“Configuring Rapid Spanning Tree,” in User Guide
for the Avaya P580 and P882 Multiservice Switches,
Software Version 6.1.
The VLAN ID of the bridge.
Use the vlan keyword and variable when
the switch is running per-VLAN or dual-layer
Spanning Tree. For a detailed description of per-
VLAN and dual-layer Spanning Tree, see Chapter 7,
“Configuring Rapid Spanning Tree,” in User Guide
for the Avaya P580 and P882 Multiservice Switches,
Software Version 6.1
The VLAN name of the bridge.
Use the vlan name keyword and
variable when the switch is running per-VLAN or
dual-layer Spanning Tree. For a detailed description of
per-VLAN and dual-layer Spanning Tree, see Chapter
7, “Configuring Rapid Spanning Tree,” in User Guide
for the Avaya P580 and P882 Multiservice Switches,
Software Version 6.1