Ip mac-format, Command mode, Description – Avaya P580 User Manual
Page 212: Syntax, Sample output, Systems, Ip mac-format -28
Chapter 11
11-28
Command Reference Guide for the Avaya P580 and P882 Multiservice Switches, v6.1
ip mac-format
Command Mode
Interface Configuration.
Description
Sets the MAC format of the IP interfaces. The no form of this command
restores the default ethv2.
Syntax
Sample Output
The following example sets the MAC format of the IP interfaces, on the
interface labeled boston, to the Subnetwork Access Protocol (snap).
(config-if:boston)#
ip mac-format snap
Systems
P550R, P580, P880, and P882.
To Configure:
ip mac-format {ethv2 | snap}
To Restore Default:
no ip mac-format {ethv2 | snap}
Table 11-15. Parameters, Keywords, Arguments
Name
Definition
{ethv2 | snap}
Set the MAC format of the IP interface to either ethv2, which
is the default, or to snap (Subnetwork Access Protocol).