Ip bootp-dhcp circuit-info, Command mode, Description – Avaya P580 User Manual
Page 197: Syntax, Systems, Ip bootp-dhcp circuit-info -13
Document No. 10-300090, Issue 1
11-13
IP
ip bootp-dhcp circuit-info
Command Mode
Global Configuration.
Description
Enables BOOTP/DHCP option 82, suboption 1 (circuitID). The no
command disables option 82, suboption 1.
This suboption identifies the slot and physical port number from which the
DHCP request was received. The default setting is disabled.
* Note:
Before you enter this command, make sure that the switch is set
to be a BOOTP/DHCP relay agent. Use the
command to enable BOOTP/DHCP relay agent on the switch.
Syntax
Systems
P550R, P580, P880, and P882.
To Enable:
ip bootp-dhcp circuit-info
To Disable:
no ip bootp-dhcp circuit-info
This manual is related to the following products: