Show ip traffic, Command mode, Description – Avaya P580 User Manual
Page 246: Syntax, Sample output, Systems, Show ip traffic -62
Chapter 11
11-62
Command Reference Guide for the Avaya P580 and P882 Multiservice Switches, v6.1
show ip traffic
Command Mode
User.
Description
Displays IP traffic statistics information.
Syntax
show ip traffic
Sample Output
The following example displays the IP traffic statistics information.
>
show ip traffic
IP statistics:
Received:
115972 total, 15153 local destination
0 packet header errors, 0 unknown protocol
0 with address errors, 0 discarded
Device is a gateway
Fragments:
0 reassembled, 0 couldn’t reassemble
0 fragmented, 0 couldn’t fragment
Sent:
5132 generated, 0 forwarded
0 no route, 0 discarded
ICMP statistics:
Received:
10 total, 0 ICMP errors, 0 unreachables
0 time exceeded, 0 parameter, 0 quench
0 redirects, 5 echo, 5 echo reply
0 timestamp request, 0 timestamp reply
0 mask requests, 0 mask replies
Sent:
10 total, 0 ICMP errors, 0 unreachables
0 time exceeded 0 parameter, 0 quench
0 redirects, 5 echo, 5 echo reply
0 timestamp request, 0 timestamp reply
0 mask requests, 0 mask replies
UDP statistics:
Received:
10666 total, 0 errors, 0 no port
Sent:
0 total
TCP statistics:
Received:
4487 total, 0 errors
Sent:
4937 total
Systems
P550R, P580, P880, and P882.