Arp timeout, Command mode, Description – Avaya P580 User Manual
Page 189: Syntax, Sample output, Systems, Arp timeout -5
Document No. 10-300090, Issue 1
11-5
IP
arp timeout
Command Mode
Interface Configuration.
Description
Configures the amount of time that an entry remains in the ARP cache on an
interface. The no form of this command restores the default value.
Syntax
Sample Output
The following example sets the arp timeout period to 300 seconds on an
interface labeled “boston”.
(config-if:boston)#
arp timeout 300
Systems
P550R, P580, P880, and P882.
To Configure:
arp timeout
To Restore Default:
[no] arp timeout
Table 11-2. Parameters, Keywords, Arguments
Name
Definition
The amount of time, in seconds, that an entry remains in the arp
cache
This manual is related to the following products: