Avaya P580 - Manual (Page 413)

Document No. 10-300090, Issue 1 19-37
OSPF
timers spf
Command Mode Global Configuration.
Description Configures the delay time (seconds) between runs of OSPF’s SPF
calculation. Use the no form of this command to restore the default (3
seconds). The valid range is 3 to 65535.
Syntax
Sample Output The following command sets the spf holdtime to 60 seconds.
(configure)# timers spf 60
Systems P550R, P580, P880, and P882.
To Configure: timers spf
To Restore Default: [no] timers spf
Table 19-25. Parameters, Keywords, Arguments
Name Definition
The time in seconds of the delay between runs of OSPF’s SPF
calculation. The range is:
minimum - 3
maximum - 65535