Set lgmp server priority, Command mode, Description – Avaya P580 User Manual
Page 171: Syntax, Sample output, Systems, Set lgmp server priority -27
Document No. 10-300090, Issue 1
10-27
Intelligent Multicast
set lgmp server priority
Command Mode
Global Configuration.
Description
Sets the LGMP server ID priority. Excluding the parameter sets the priority
to its default of 128.
Syntax
set lgmp server priority [
Sample Output
The following example sets the LGMP server priority to 140.
(configure)#
set lgmp server priority to 140
LGMP Server ID Priority successfully set to 140
Systems
P550R, P580, P880, and P882.
Table 10-14. Parameters, Keywords, Arguments
Name
Definition
Specifies the most significant byte of the LGMP Server ID.
The lower four bytes are defined by the IP address of the
interface and VLAN associated with the particular LGMP
Server. The server priority can make LGMP servers on a
device distributors or non-distributors.
The lowest LGMP Server ID wins the distributor election.
The range is 0 to 255.