Ipx type-20-propagation, Command mode, Description – Avaya P580 User Manual
Page 300: Syntax, Sample output, Systems, Ipx type-20-propagation -34
Chapter 13
13-34
Command Reference Guide for the Avaya P580 and P882 Multiservice Switches, v6.1
ipx type-20-propagation
Command Mode
Interface Configuration.
Description
Specifies whether or not an IPX interface accepts and forwards IPX type 20
propagation packet broadcasts. The default setting is disabled.
Syntax
Sample Output
The following example forwards type 20 propagation broadcast packets to
other network segments on an interface labeled “boston”.
(config-if:boston)#
ipx type-20-propagation outbound
Systems
P550R, P580, P880, and P882.
To Enable:
ipx type-20-propagation {both | inbound | outbound}
To Disable:
ipx type-20-propagation disabled
Table 13-16. Parameters, Keywords, Arguments
Name
Definition
{both | inbound |
outbound}
• both - The interface accepts and forwards type 20
propagation broadcast packets. This is the default.
• inbound - The interface only accepts type 20
broadcast packets.
• outbound - The interface only forwards type 20
propagation broadcast packets to other network
segments.
• disabled - The interface does not accept or forward
type 20 propagation broadcast packets.