Ipx rip-max-packetsize, Command mode, Description – Avaya P580 User Manual
Page 284: Syntax, Sample output, Systems, Ipx rip-max-packetsize -18
Chapter 13
13-18
Command Reference Guide for the Avaya P580 and P882 Multiservice Switches, v6.1
ipx rip-max-packetsize
Command Mode
Interface Configuration.
Description
Enables the maximum packet size for RIP updates sent out the interface. To
restore the default packet size, use the no form of this command. The
default state is disabled.
Syntax
Sample Output
The following example enables the maximum packet size for RIP updates
on an interface labeled “boston”.
(config-if:boston)#
ipx rip-max-packetsize
Systems
P550R, P580, P880, and P882.
To Enable:
ipx rip-max-packetsize
To Disable:
[no] ipx rip-max-packetsize
This manual is related to the following products: