Show port status, Command mode, Description – Avaya P580 User Manual
Page 483: Syntax, Sample output, Systems, Show port status -51
Document No. 10-300090, Issue 1
21-51
Port
show port status
Command Mode
User.
Description
Displays port status information. The status information of all ports is
displayed by default.
Syntax
show port status [{
Sample Output
The following example displays the status of the ports on the modules in the
switch.
>
show port status
Port
TypeMode
StatusAuto-NegSpeed
Duplex
-----
-------- -------- -------- ------------- --------- -----------
3/1 Gigabit Enabled No Link Disabled 1 Gb/s Full Duplex
4/1 Gigabit Enabled No Link Disabled 1 Gb/s Full Duplex
4/2 Gigabit Enabled No Link Disabled 1 Gb/s Full Duplex
6/1 10/100 Enabled No Link Enabled Auto-Neg Auto-Neg
6/8 10/100 Enabled No Link Enabled Auto-Neg Auto-Neg
6/17 10/100 Enabled No Link Enabled Auto-Neg Auto-Neg
Systems
P550R, P580, P880, and P882.
Table 21-44. Parameters, Keywords, Arguments
Name
Definition
Specifies the number of the module where the status of
every port on that module is displayed.
Specifies a range of ports whose status information is to
be displayed.