Sample output, Systems – Avaya P580 User Manual
Page 293
Document No. 10-300090, Issue 1
13-27
IPX
Sample Output
The following example:
■
sets the precedence to 2
■
sets the filter-name to netbios
■
sets the service type to 1
■
applies filters to SAP packets in both directions (both)
■
adds the service to the service table (allow)
■
sets the filter hops to 4
on an interface labeled “boston”.
(config-if:boston)#
ipx sap-name-filter 2 netbios 1 both allow 4
Systems
P550R, P580, P880, and P882.
{filter | allow}
The action to take for the IPX service.
• filter - Do not add the service to the service table
(inbound SAP packets) or do not advertise the service
(outbound SAP packets).
• allow - Add the service to the service table (inbound
SAP packets) or advertise the service (outbound SAP
packets).
The number of hops to get to the service in the service table
(inbound SAP packets) or in the advertised information
(outbound SAP packets). The range is 0 to 16 hops.
Table 13-11. Parameters, Keywords, Arguments
Name
Definition
2 of 2