Avaya P580 - Manual (Page 350)

Chapter 16
16-14 Command Reference Guide for the Avaya P580 and P882 Multiservice Switches, v6.1
Sample Output The following example sends all of the switch_fabric syslog messages to
the
SNMP trap receivers.
(configure)# logging traps switch_fabric
Systems P550R, P580, P880, and P882.
service_port Logs status changes in service ports.
Use the set port category command to set a port as
a service port. For information on this command,
see
Chapter 21 . This feature makes it possible for
you to use different notification levels for critical
(service ports), if desired.
user_port Logs status changes in user ports.
Use the set port category command to set a port as
a user port. For information on this command, see
Chapter 21 . This feature makes it possible for you
to use different notification levels for critical
(service ports), if desired.
auth_failure Logs authentication failures. This is a security-
related feature used to detect unauthorized SNMP
activity.
bridge_stat Logs changes in bridge status.
switch_fabric Logs failures in the switch fabric. These failures
are critical and should be monitored closely.
redundant_cpu Logs changes in status of a redundant CPU.
Notification is sent if:
• The status changes from standby to active or
vice versa.
• The active supervisor loses or establishes
contact with the standby supervisor.
unknown_mac Logs unknown MAC addresses if received.
snmp Logs SNMP events, if SNMP protocol event
logging is enabled
.
login_status Logs User login or logout.
Table 16-6. Parameters, Keywords, Arguments
Name Definition
2 of 2