Avaya P580 - Manual (Page 474)

Chapter 21
21-42 Command Reference Guide for the Avaya P580 and P882 Multiservice Switches, v6.1
set port trunking-format
Command Mode Global Configuration.
Description Sets the trunking format for switch ports. The default setting is clear.
Syntax set port trunking-format { | }[...,{num> | }] {clear | ieee-802.1Q | multi-layer | 3com}
Sample Output The following example sets the trunking option for the second switch port
on the module in slot 3 and switch ports 7 through 11 on the module in slot
5 of an Avaya Multiservice switch to the IEEE standard.
(configure)# set port trunking-format 3/2,5/7-11 ieee-802.1Q
Port trunking-format set: 3/2,5/7,5/8,5/9,5,10,
5/11
Systems P550R, P580, P880, and P882.
Table 21-36. Parameters, Keywords, Arguments
Name Definition
Specifies the number of the module where the trunking
mode is to be set for each switch port on the module.
range> Specifies a range of switch ports whose trunking mode is
to be set.
clear Specifies the trunking option, which does no VLAN
tagging.
ieee-802.1Q Specifies the IEEE 802.1Q ethernet VLAN tagging
trunking option.
multi-layer Specifies a widely available proprietary VLAN tagging
trunking option.
3com Specifies the 3Com VLAN tagging trunking option.