Ip ospf ext-route-metric, Command mode, Description – Avaya P580 User Manual
Page 393: Syntax, Sample output, Systems, Ip ospf ext-route-metric -17
Document No. 10-300090, Issue 1
19-17
OSPF
ip ospf ext-route-metric
Command Mode
Global Configuration.
Description
Sets the metric type used for external routes to type1 or type2. Use the no
form of this command to restore default values. The default values are:
■
local (type1)
■
rip (type2)
■
static-hp (type2)
■
static-lp (type-2)
Syntax
Sample Output
The following command sets the metric type for RIP used for external
routes to Type 2
(configure)#
ip ospf ext-route-metric rip type2
Systems
P550R, P580, P880, and P882.
To Configure:
ip ospf ext-route-metric {local | rip | static-hp | static-lp}
{type1 | type2}
To Restore
Default:
[no] ip ospf ext-route-metric {local | rip | static-hp | static-
lp}
Table 19-12. Parameters, Keywords, Arguments
Name
Definition
local
Specifies whether imported local routes are advertised in OSPF with
type 1 (internal) or type 2 (external) metrics.
rip
Specifies whether imported RIP routes are advertised in OSPF with
type 1 (internal) or type 2 (external) metrics.
static-hp
Specify whether imported high preference static routes are advertised
in OSPF with type 1 (internal) or type 2 (external) metrics.
static-lp
Specify whether imported low preference static routes are advertised in
OSPF with type 1 (internal) or type 2 (external) metrics.