Set radius authentication group, Command mode, Description – Avaya P580 User Manual
Page 529: Syntax, Sample output, Systems, Set radius authentication group -3
Document No. 10-300090, Issue 1
24-3
RADIUS
set radius authentication group
Command Mode
Global Configuration.
Description
Sets the group to which the switch belongs. If a group is set, then the group
name is included in Access Request messages that are sent to the RADIUS
server. By default, the switch does not belong to a group.
The group name can be 22 alpha characters.
Syntax
Sample Output
The following command assigns the switch to group avaya switches:
(configure)#
set radius authentication group avaya switches
The following command clears the group membership of the switch:
(configure)#
clear radius authentication group
Systems
P550R, P580, P880, and P882.
To Configure:
set radius authentication group
To Clear:
clear radius authentication group
Table 24-1. Parameters, Keywords, Arguments
Name
Definition
The group to which the switch belongs. The group name can be 22
characters.