Avaya P580 - Manual (Page 585)

Document No. 10-300090, Issue 1 28-7
Rapid Spanning Tree Protocol
set port spantree priority
Command Mode Global Configuration.
Description Sets the priority of a bridge port. A higher priority port (has a lower priority
number) is more likely to be chosen as the primary path in the spanning tree
when there are two or more paths of equal cost.
The valid range for this field is 0 to 240 in increments of 16. The default
setting is 128.
Syntax set port spantree priority [...,]
{802.1D | vlan { | name }
Table 28-5. Parameters, Keywords, Arguments
Name Definition
range> The module and port or port range.
Priority of the port as a decimal value. A higher priority
port (has a lower priority number) is more likely to be
chosen as the primary path in the spanning tree when
there are two or more paths of equal cost.
The valid range for this field is 0 to 240 in increments of
16. The default setting is 128.
802.1D Use this keyword if the switch is running IEEE 802.1D
Spanning Tree. For a detailed description of IEEE 802.1D
Spanning Tree, see Chapter 7, “Configuring Rapid
Spanning Tree,” in User Guide for the Avaya P580 and
P882 Multiservice Switches, Software Version 6.1.
1 of 2