Appletalk mac-format, Command mode, Description – Avaya P580 User Manual
Page 49: Syntax, Sample output, Systems, Appletalk mac-format -9
Document No. 10-300090, Issue 1
3-9
Appletalk
appletalk mac-format
Command Mode
Interface Configuration.
Description
Sets which Appletalk Interface MAC format is to be used. The default value
is snap. The no form of this command resets the MAC format for the
interface to the default value.
Syntax
Sample Output
The following example sets the Appletalk Interface MAC format to ethv2.
(config-if:serial0)#
appletalk mac-format ethv2
Systems
P550R, P580, P880, and P882.
To Configure:
appletalk mac-format {ethv2 | snap}
To Restore Default:
[no] appletalk mac-format
Table 3-7. Parameters, Keywords, Arguments
Name
Definition
{ethv2 | snap}
• ethv2 - Ethernet Version 2.
• snap - Subnetwork Access Protocol.
This manual is related to the following products: