Show ipx route, Command mode, Description – Avaya P580 User Manual
Page 307: Syntax, Sample output, Systems, Show ipx route -41
Document No. 10-300090, Issue 1
13-41
IPX
show ipx route
Command Mode
User.
Description
Displays the contents of the IPX Routing Table.
Syntax
show ipx route [{
Sample Output
The following is an example of the output that displays after you enter the
show ipx route command.
Codes: C - Connected primary network, S -
Static, R - RIP
s - seconds
7 Total IPX routes.
IPX default route known
C 100 (Ethernet 802.3), 100
C 1001 (Ethernet II), 1001
C 1002 (Ethernet 802.2), 1002
C 1003 (Ethernet SNAP), 1003
C 10005129(Ethernet SNAP), 10005129
R AAAAAAAA[2/2] via
10005129.00:c0:4f:ae:6b:6d, 10005129
S FFFFFFFFvia 100.02:e0:3b:00:45:63, 100
Systems
P550R, P580, P880, and P882.
Table 13-20. Parameters, Keywords, Arguments
Name
Definition
The number of the network whose routing table entry you want
to display. This is an eight-digit hexadecimal number that
uniquely identifies a network cable segment. It can be a number
in the range 1 to FFFFFFFD. You do not need to specify
leading zeros in the network number. For example, for the
network number 000000AA, you can enter AA.
default
Displays the default route. This is equivalent to specifying a
value of FFFFFFFE for the argument network.