Teledyne 3060e - Ultra Trace oxygen analyzer - Manual (Page 96)

4-48
Model 3060E Model 3060E Model 3060E Model 3060E Model 3060E Chapter 4 Chapter 4 Chapter 4 Chapter 4 Chapter 4
Teledyne Electronic Technologies
Analytical Instruments
4. Press CLOCK to continue to the time/
date or scheduled Zero/Span menu.
5. You are given the option of setting the
time/date, or setting the schedule for
Zero or Span.
6. Use the UP and DOWN keys to scroll
through the values within each clodk
parameter Press
SELEC to select the
desired parameters. Press ACCPT to
enter all of the selected values into the
computer, and return you to the previ-
ous screen, where pressing
ESC twice
returns you to the Analyze mode menu.
• If you have pressed ZERO , you can
schedule the interval for zeroing. Set
Auto Zero to ON, and then set the time
of the next zero by using the
UP , DOWN
and SELEC keys. Press ACCPT when
done.
• If you try to schedule a zero before the
analyzer has been zeroed, the system
will tell you that the system must be
zeroed first.
• If you have pressed SPAN , you can
select the scheduled span interval (see
above). Set Auto Span to ON, and then
set the time of next scheduled span. The
screen also displays the current span
level.
VALVES: ANALYZE T=25C
- - - - SYSTEM SETUP - - - -
CLOCK: SET TIM E AND DATE
ALRM S: SET LIM ITS, TYPES
SETTL: SETUP AUTO SETTLING
1 2 3 4 5
ALRM S CLOCK ESC SETTL M O RE
VALVES: ANALYZE
SET TIM E/DATE
1-01-93 6:05 PM
1 2 3 4 5
UP DOW N SELECT ACCPT
T=25C
VALVES: ANALYZE
SELECT CLOCK FUNCTIO N
SET
TIM E
SKED
ZERO SKED
SPAN
1 2 3 4 5
ZERO SPAN SET ESC
T=25C
VALVES: ANALYZE
INTERVAL-DAY : HR : M IN = 007 : 00 : 00
AUTO ZERO: OFF
NEXT ZERO = 01 : 00 AM 01-01-93
1 2 3 4 5
UP ESC DOW N SELECT ACCPT
T=25C
VALVES: ANALYZE
SCHEDULED ZERO ING CANNOT BE
PRO GRAM MED UNTIL THE SYSTEM
HAS BEEN ZERO ED THE FIRST TIME
1 2 3 4 5
ACK
T=25C
VALVES: ANALYZE
INTERVAL-DAY : HR : M IN = 007 : 00 : 00
AUTO SPAN: OFF
SPAN LEVEL: 20 PPB
NEXT SPAN = 01 : 00 AM 01-01-93
1 2 3 4 5
UP ESC DOW N SELECT ACCPT
T=25C