Teledyne 3060e - Ultra Trace oxygen analyzer - Manual (Page 95)

Teledyne Electronic Technologies
Analytical Instruments
4-47
Operations Operations Operations Operations Operations Ultra Ultra Ultra Ultra Ultra T T T T Trace Oxyg race Oxyg race Oxyg race Oxyg race Oxygen Anal en Anal en Anal en Anal en Analyz yz yz yz yzer er er er er
13. At this point in the auto settling setup
mode, select OFFST for auto calibrator
offset.
14. You are asked to correct the auto
calibrator offset. Press NO ( the default
selection) if the screen message CUR
-
RENTLY ENABLED appears, or press
YES if the screen reads CURRENTLY
DISABLED .
15. Press ESC twice to return to the Ana-
lyze mode main menu.
Setup: Clock/Scheduled Span or Scheduled Zero
1. After completing initial start-up, select
SETUP from the Analyze mode menu to
select the auto settling setup function.
2. Press SYSTM to continue.
3. The next screen asks you to enter your
authorization code. Use the UP and
DOWN keys to scroll through the letters/
numbers. Press SELEC to enter the
desired value for each space in the code.
Press
ACCPT when finished.
SLO PE PERO D
VALVES: ANALYZE C=9:59 T=25C
SELECT AUTO -SETTLE PARAM ETER
TO M O DIFY - PERIO D, SLO PE
OR AUTO CALIBRATOR OFFSET
1 2 3 4 5
O FFST ESC
YES
VALVES: ANALYZE C=9:59 T=25C
ENABLE AUTO CALIBRATOR OFFSET
CORRECTIO N?
CURRENTLY DISABLED
1 2 3 4 5
NO ESC
VALVES: ANALYZE T=25C C=9:59
FLO W = 150.0 CC/M IN
AUTORANGE: 10 PPM
1 2 3 4 5
RANGE ALRM R
5.00
PPM 02
SETUP STDBY CAL
VALVES: ANALYZE
FLO W = 150.0 CC/M IN
AUTORANGE: 10 PPM
1 2 3 4 5
RANGE ALRM R
5.00
PPM 02
T=25C C=9:59
SETUP STDBY CAL
VALVES: ANALYZE T=25C C=9:59
SELECT SYSTEM PASSW O RD SETUP
- - O R - -
SERIAL M O DEM , ZERO GAS SCRUB
OR NEGATIVE O2 READINGS
1 2 3 4 5
SYSTM M O D EM G A S NegO 2 ESC
VALVES: ANALYZE C = 9:59 T = 25C
ENTER AUTHORIZATION CODE
ENTER YOUR CODE _ _ _