Teledyne 3060e - Ultra Trace oxygen analyzer - Manual (Page 105)

Teledyne Electronic Technologies
Analytical Instruments
4-57
Operations Operations Operations Operations Operations Ultra Ultra Ultra Ultra Ultra T T T T Trace Oxyg race Oxyg race Oxyg race Oxyg race Oxygen Anal en Anal en Anal en Anal en Analyz yz yz yz yzer er er er er
Range Mode
AutoRange is preset into the system as the default. AutoRanging lets the
system select the range based on current oxygen levels. Manual range allows
you to scroll through the ranges and set your own desired range value.
AutoRange Function
1. After completing initial start-up, you
may select RANGE from the Analyze
mode main menu.
2. After pressing RANGE , the screen
directs you to select from auto or fixed
(manual) range. Press
AUTO to select
AutoRange.
3. The next screen returns you to the
Analyze mode menu. The last line
indicates the range selection and mode.
VALVES: ANALYZE T=25C C=9:59
FLO W = 150.0 CC/M IN
M AN RANGE: 10 PPM
1 2 3 4 5
RANGE ALRM R
5.00
PPM 02
SETUP STDBY CAL
VALVES: ANALYZE T=25C C=9:59
SELECT AUTO-RANGE OR
FIXED-RANGE FO R O2.
1 2 3 4 5
AUTO FIXED ESC
VALVES: ANALYZE T=25C C=9:59
FLO W = 150.0 CC/M IN
AUTORANGE: 10 PPM
1 2 3 4 5
RANGE ALRM R
5.00
PPM 02
SETUP STDBY CAL