Model 3060e, Setup: alarms, Teledyne electronic technologies – Teledyne 3060e - Ultra Trace oxygen analyzer User Manual

Page 88: After completing initial start-up, select, Keys to scroll through the letters/ numbers. press, 1 for alarm 1, 2 for alarm 2, or, For alarms 3, 4, and 5. press

4-40

Model 3060E

Chapter 4

Teledyne Electronic Technologies

Analytical Instruments

Setup: Alarms

1. After completing initial start-up, select

SETUP

from the Analyze mode menu to

select the alarm setup function.

NOTE: The ALRMR key in the Analyze mode menu is used to defeat the

audible alarm in increments of 15 seconds, after which the alarm
will continue if the condition that triggered the alarm is still
present.

2. Press

SYSTM

to continue alarm setup.

3. The next screen asks you to enter your

authorization code. Use the

and

DOWN

keys to scroll through the letters/

numbers. Press

SELEC

to enter the

desired value for each space in the code.
Press

ACCPT

when finished.

NOTE: If the authorization code is lost or needs to be changed, refer to the

Cold Start procedure at the beginning of this chapter.

4. Press

ALRMS

to continue alarm setup,

ESC

to return to the Analyze mode.

5. The next screen directs you to select

which alarm to set up. You can set up
to five alarms. Press

1 for alarm 1,

2 for alarm 2, or

MORE

for alarms 3,

4, and 5. Press

ESC

to return to step 4.

VALVES: ANALYZE

T=25C

C=9:59

FLO W = 150.0 CC/M IN

AUTORANGE: 10 PPM

RANGE

ALRM R

5.00

PPM 02

SETUP

STDBY

CAL

VALVES: ANALYZE C=9:59

T=25C

SELECT SYSTEM PASSW O RD SETUP

- - O R - -

SERIAL M O DEM , ZERO GAS SCRUB

OR NEGATIVE O2 READINGS

SYSTM

M O DEM

G AS

NegO 2

ESC

VALVES: ANALYZE C=9:59

T=25C

- - - - SYSTEM SETUP - - - -

CLOCK: SET TIM E AND DATE

ALRM S: SET LIM ITS, TYPES

SETTL: SETUP AUTO SETTLING

ALRM S

CLOCK

ESC

SETTL

M O RE

VALVES: ANALYZE C=9:59

T=25C

ALARM S SETUP
SELECT ALARM TO SETUP

AL 2

AL 1

M O RE

ESC