Teledyne 3060e - Ultra Trace oxygen analyzer - Manual (Page 27)

Teledyne Electronic Technologies
Analytical Instruments
3-1
Installation Installation Installation Installation Installation Ultra Ultra Ultra Ultra Ultra T T T T Trace Oxyg race Oxyg race Oxyg race Oxyg race Oxygen Anal en Anal en Anal en Anal en Analyz yz yz yz yzer er er er er
Installation
Overview
Installation of the analyzer includes:
1. Unpacking the system.
2. Recognizing the necessary precautions when installing the system.
3. Adding electrolyte to the Ultra Trace sensor.
4. Adding electrolyte to the calibrator.
5. Hooking up electrical connections.
6. Hooking up the sample/span gas and instrument air supply to the
appropriate connections.
7. Testing the system.
Unpacking the Analyzer
Carefully unpack the analyzer and inspect it for damage. Immediately report
any damage to the shipping agent. Remove the packing slip and verify that you
have received all of the correct materials.
Packing list:
1. Model 3060E Ultra Trace Oxygen Analyzer
2. 3060E Accessory Kit (P/N A59582)
The analyzer is shipped with all the materials and special items you need to
install and prepare the system for operation. The shipping carton contains the
following components:
1. Analyzer assembly
• Ultra Trace sensor
• Calibrator
• Two cadmium anodes (in holders)
• Electronics