Franklin Fueling Systems Tank Sentinel (TS-1001, 2001, 504, 508 & 750) Installation - Manual (Page 9)

1 Page 1 - 4 TANK SENTINEL ® INSTALLATION GUIDE
Product Description — TS-750
The INCON Tank Sentinel model TS-750 (
T7
) is an automatic and continuous tank
monitoring system for up to 4 underground storage tanks (USTs). It performs many
important functions simultaneously. A basic TS-750 Automatic Tank Gauge (ATG)
consists of a wall-mounted console, liquid level probes (TSP-LL2 one for each
tank), and probe installation kits.
The TS-750:
• can display / printout in several languages (English, French, Spanish, Portuguese)
• monitors deliveries, inventory levels, thefts, and other conditions (such as: high
water levels, low product levels, reorder product levels, and full and over-full
product levels)
• generates reports automatically in response to preset/programmed conditions and
alarms
• provides audio / visual annunciation when an alarm or warning condition exists
• enhances site-management by increasing efficiency, and by providing the data to
make intelligent business choices
• interfaces with external audio/visual alarms with two form-C relay outputs (std)
• communicates to external locations in response to preset/programmed conditions
or alarms, and communicates bidirectionally during data acquisition if an optional
external modem is installed
• detects external product leaks with optional, approved, leak detection sensors (see
TABLE 1-2), up to 8 sensors can be wired internally
• can be mounted within a port-holed, Nema 4X enclosure (TS-NEMA4X)