Franklin Fueling Systems Tank Sentinel (TS-1001, 2001, 504, 508 & 750) Installation - Manual (Page 8)

INSTALLATION OVERVIEW Page 1 - 3 1
Product Description — TS-504
The INCON Tank Sentinel model TS-504 (
T4
) is an automatic and continuous
inventory monitoring system for up to 4 aboveground storage tanks (ASTs). It
performs many important functions simultaneously. A basic TS-504 Automatic Tank
Gauge (ATG) consists of a wall-mounted console, inventory only liquid level probes
(
TSP-LL2-I one for each tank), and probe installation kits. There are many
additional optional hardware and software upgrades that are available for the
system. The TS-504:
• can display / printout in several languages (English, French, Spanish, Portuguese)
NOTE that an optional printer is required for local printing of reports
• monitors deliveries, inventory levels, thefts, and other conditions (such as: high
water levels, low product levels, reorder product levels, and full and over-full
product levels)
• generates reports automatically in response to preset/programmed conditions and
alarms
• provides audio / visual annunciation when an alarm or warning condition exists
• enhances site-management by increasing efficiency, and by providing the data to
make intelligent business choices
• interfaces with external audio/visual alarms with two form-C relay outputs (std)
• communicates to external locations in response to preset/programmed conditions
or alarms, and communicates bidirectionally during data acquisition if an optional
plug-in modem or fax-modem is installed inside of the console
• detects external product leaks with optional, approved, leak detection sensors
(see TABLE 1.2)... up to 8 sensors can be wired internally, and an additional 8 or
16 sensors can be wired to 1 or 2 optional, external TS-SEM BriteBoxes (see
Chapter 7 about the TS-SEM)
• monitors precise tank inventory and sales data when an optional TS-DIM
dispenser interface module is installed
• can be mounted within a port-holed, Nema 4X enclosure (TS-NEMA4X)
Product Description — TS-508
The INCON Tank Sentinel model TS-508 (
T8
) is an automatic and continuous
inventory monitoring system for up to 8 aboveground storage tanks (ASTs). It
performs many important functions simultaneously. A basic TS-504 Automatic Tank
Gauge (ATG) consists of a wall-mounted console, inventory only liquid level probes
(
TSP-LL2-I one for each tank), and probe installation kits. There are many
additional optional hardware and software upgrades that are available for the
system. The TS-508 includes all of the features shown previously in the TS-504
except that it can monitor 4 additional tanks, or 8 tanks total.