Franklin Fueling Systems Tank Sentinel (TS-1001, 2001, 504, 508 & 750) Installation - Manual (Page 6)

INSTALLATION OVERVIEW Page 1 - 1 1
1 Installation Overview
Before You Get Started
It is important to follow the instructions in this manual. They have been prepared to
help you install the Tank Sentinel
® system successfully, so that it will operate safely
and effectively. Please read the entire manual carefully. Failure to follow the
instructions in this manual can result in faulty operation, equipment damage, injury,
or death. This equipment must be installed, programmed, and serviced by factory-
trained & certified technician. Failure to comply will void the system warranty.
Contents of this Manual
This manual contains installation and site preparation instructions for the INCON
Tank Sentinel
system, which includes the console, level probes, and concise
instructions for leak detection sensors. The overall safety issues, troubleshooting
guide, warranty, service, and return policy — as defined in this manual — must be
followed.
Where to Find Information
The system operation and programming instructions, troubleshooting guide and
console maintenance, are contained in separate manuals or Quick Reference
Guides. Detailed installation and testing instructions for each type of leak detection
sensors are contained within separate manuals. Likewise, the installation, testing,
and programming of various upgrade kits and optional accessories (such as
the: TS-RA2 Remote Overfill Alarm and TS-RK Remote Alarm Acknowledge Unit)
are also contained in separate manuals or addenda.
Questions about the installation of the system, or this manual, should be directed
to INCON, P.O. Box 638, Saco, Maine 04072. Please address all inquiries to our
Technical Service Department, or call one of our Service Technicians toll free at
1-800-984-6266 (+207 283 0156)
Product Codes: T1 = TS-1001, T2 = TS-2001, T4 = TS-504, T7 = TS-750, T8 = TS-508,
none = all products