Printronix PrintNet Enterprise User Manual
Page 50
50
Chapter
2
The Menu Bar
Alert Delivery Tab
Figure 33. Status Monitoring Properties:
Alert Delivery Tab – Alert Log Sub-Tab
Select
Status
Properties
to open the Status Monitoring Properties dialog
box. Click the
Alert Delivery
tab. Check the
Enable Notification
check box
to enable the option. The Alert Delivery properties allow you to customize the
way PNE notifies you of potential printer errors. Descriptions of the three alert
types follows:
1.
Alert Log:
Allows PNE to log alerts to a file located in the PNE installation
directory. To log alerts, check the
Enable Log File
check box, then click
Add
(see Figure 33). A task item adds to the log list. In the task item,
specify the following as applicable, then click
Apply
or
OK
.
Log File:
To name the log file. The default file name is
alerts.log
.
Size:
To set the maximum file size, in bytes. The default (and
minimum required) size is 1000 bytes.
Device:
To choose a device item you want PNE to monitor, such as a
folder, specific printer, or a range of IP addresses.
First:
To set the beginning IP address in a polling range. Use this
option if you select
Range:
as the Device option.
Last:
To set the last IP address in a polling range. Use this option if
you select
Range:
as the Device option.