Printronix PrintNet Enterprise - Manual (Page 142)

142
Chapter 4 Set Wireless Properties
Figure 121. Wireless Properties:
Kerberos Tab – Set Password Sub-Tab
Set Password Sub-Tab
You must click Read to obtain the printer’s settings before you can modify
them.
NOTE: If the NIC has a password assigned to the user guest , then a Telnet
guest password is required. See “Security Tab” on page 63.
New Password/Confirm Password: Use these fields to set the Kerberos
password. Click Confirm to confirm that both the passwords match.
When you are finished, click Send to transmit the value to the printer.
NOTE: If the NIC has a password assigned to the user root , then a Telnet
root password is required. See “Security Tab” on page 63.
If you are not going to modify settings on any other tabs, you must update the
printer for the settings to take effect. Click
Update to update the printer.
IMPORTANT Make sure the settings match those configured in the Access Point.