Printronix PrintNet Enterprise - Manual (Page 290)

290
Chapter 7 Data Validation
3. CaptureDate
This indicates the date and time the record was captured, using local time, in
the format: Day, Month, Date, Time (00:00:00), Time Zone, and Year.
See Figure 256.
Figure 256. CaptureDate Field Format
If the data is being sent to an external database, it is represented by a fixed
format string defined as
MM-dd-yyyy_HH:mm:SS where:
MM is the month of the year (01-12)
dd is the day of the month (01-31)
yyyy is the year
HH is the hour of the day (00-23)
mm is the minutes of the hour
SS is the seconds of the minute
4. Printer Name
This indicates the printer name as it appears in the Printer List window (see
Figure 245 on page 282).
5. Printer Address
This is the IP address of the printer.
6. Failure Code
Bar Code
This is the hex value assigned for each type of failure, shown below.
See “7. Failure Message” on page 291.
Failure Code
(Hex)
Failure Code
(Binary)
Failure Message
0000 0000 0000 0000 0000 No error
0001 xxxx xxxx xxxx xxx1 PDF 417 Gap
0002 xxxx xxxx xxxx xx1x Decodeability
0004 xxxx xxxx xxxx x1xx Defect
0008 xxxx xxxx xxxx 1xxx Percent Decode
0010 xxxx xxxx xxx1 xxxx Quiet Zone
0020 xxxx xxxx xx1x xxxx (Symbol) Contrast
0040 xxxx xxxx x1xx xxxx Encodation
0080 xxxx xxxx 1xxx xxxx Checksum
0100 xxxx xxx1 xxxx xxxx Calibration
0200 xxxx xx1x xxxx xxxx Overall Grade Failure